strip planking boat construction
Strip planking wooden boats. the strip planking method of boat building could be described as a form of carvel planking. however, using strips is a form of construction which is much more suitable for the back yard builder. using this method a beautifully round bilged boat can be built with less skill and tools than with carvel.. The strip plank method of construction. for this, we will use several different selway fisher designs as examples but mainly the 17'9" indian runner steam launch. a. the chipboard moulds (sectional shapes) are carefully erected onto a simple wood strongback.. b. in this case, the internal stem has been laminated but may be made up from solid wood - note the hog which is laminated in situ on. Strip cedar planking (including strip planking with balsa) strip cedar is a method commonly used today for kayaks and canoes but as one of the main advantages is that practical any shape can be created, some very interesting multihulls have been built with the same concept. the fact that it uses wood along with relatively simple techniques and tools, permits builders of minimal skill to have. 
strip planking boat construction Forms a ll of our strip planked boats use temporary forms without permanent frames. if forms are meant to be temporary, the edges should be covered with polyehtylene to prevent the planking from sticking to forms. it is important that the planking strips be held tight against the form in order to eliminate a lot of unnecessary fairing.. This was going to be the supply for strip planking my hull, so claw hammers and crowbars went into action to salvage these tongue-and-groove boards before the building was demolished. we then had the challenge of converting these boards into 3/8 inch (12mm) bead and cove strips: ensuring all the fastenings were removed before cutting, scarfing.
0 komentar:
Posting Komentar