planking sailboat
Planking is now proceeding from the sheer strake downward for about 7 strakes. (a strake is one row of planking all around the boat. so far on lion, each strake has consisted of 3 or 4 planking boards per side.) then the garboard (lowest strake next to the keel) will be hung and planking will proceed up to meet the topside planks.. Plank 2 is ready to go on the boat but i'm waiting till i'm rested and plan to spend most of the day making sure the second plank goes on right. it took all afternoon to place and fit the second plank. i had to cut slight bevels on the back bulkhead so the plank would fit better, but since it was the same on both sides i did not worry.. Strip planking is an increasingly popular method of boat construction (over half of all our new design work is for strip planked craft). it enables the amateur boat builder to produce a beautiful round bilged hull without having traditional boat building skills.. 
planking sailboat Planking a model boat is a difficult and time-consuming process. each plank must be individually shaped and placed, using glue that binds nearly instantly, leaving little room for mistakes. once the planks have been successfully laid, though, the model will bear a unique look that can’t be achieved with any other form of hull building.. How to build a wooden strip planked boat. strip planking. a brief description, not a boatbuilding class. s trip planking is a form of carvel planking. the hull is built over forms using strips of wood, edge-glued, and edge fastened together. the strips are kept narrow so that there is very little shaping required. strips are usually a minimum.
0 komentar:
Posting Komentar